Disk Trays; Standard Disk Tray - NETGEAR ReadyNAS 102 Hardware Manual

Disk Trays

All systems except the EDA 500 use standard disk trays. The EDA 500 comes with its own
special disk trays. This section describes both the standard and EDA 500 disk trays.

Standard Disk Tray

The following figure shows the features of the standard disk tray. This disk tray is used in all
systems except the EDA 500. For information about the EDA 500 disk tray, see
Disk Tray on page 93.
1
2
3
4
Figure 31. Standard disk tray
1. Disk tray
2. Disk tray release latch
3. Recessed disk tray handle lock
4. Disk tray handle
5. Disk screw holes
6. Mounting bracket
7. Bracket lock
IMPORTANT:
To maintain adequate airflow, make sure that all disk trays remain
in the drive bays, even if no disk is installed in the tray.
Do not use standard disk trays with the EDA 500. Use only EDA 500
disk trays with the EDA 500.
ReadyNAS OS 6 Desktop Storage Systems
5
Disks
92
EDA 500
6
7