Status Information - NETGEAR ReadyNAS 102 Hardware Manual

Status Information

You can obtain information about the status of your storage system by reviewing the
indicators listed in the following table.
Table 10. EDA 500 indicator descriptions
Indicator
Power LED
eSATA LED
Volume LED
Alert LED
Disk LEDs
ReadyNAS OS 6 Desktop Storage Systems
Description
The Power LED has these states:
• On. Powered on.
• Off. Powered off.
The eSATA LED has these states:
• On. The SATA link is established between the EDA 500 and a host.
• Off. The SATA link is not established.
The Volume LED has these states:
• On. The data volume or volumes are mounted by a host.
• Off. The data volume or volumes are not mounted. You can safely disconnect
the eSATA cable.
The Alert LED has these states:
• On. The system needs attention. Use the local admin page to determine the
problem. For more information, see the ReadyNAS OS 6.2 Software Manual,
which is available at http://support.netgear.com/product/ReadyNAS-OS6.
• Off. The system is healthy.
A disk LED next to each active drive bay indicates the status of the disk inside.
(The cold spare drive bay has no LED.) The disk LEDs have these states:
• Solid blue. Power is on and the disk is operating normally.
• Blinking blue. The disk is active.
• Solid red. The disk was removed, failed, or is resynchronizing. See the
display screen for details.
• Off. No disk is present.
NETGEAR EDA 500
89