(4) Turn on the power. Updating the firmware should start.
The progressing status is shown on the LCD.
appear one by one
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
End of updating:
All the dots repeat turning on and off
(5) Turn off the power and remove the Recovery ROM PBA. Then mount the Slid cover.
(6) Turn on the power while pressing the [ * ] and [ # ] keys., then turn off.
March 2000 © TOSHIBA TEC
- - - - - - - - - - - - - - - - - -
disappear one by one
→
- - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - -
11-81
- - - - - - - -
DP120F/DP125F Troubleshooting