2.5.2 Top Cover Open Switch
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Remove the rear side frame. (Refer to "2.4.3 Rear Side Frame.")
(2)
Remove the two screws from the top cover open switch, remove top cover open switch
and actuator.
(3)
Disconnect the two connectors from the top cover open switch.
(4)
Reassemble the components in the reverse order of disassembly.
NOTE: After reassembling, perform the sensor test referring to the "Chapter 11:
1.5.4 SENSOR TEST" on page 11-20.
March 2000 © TOSHIBA TEC
Actuator
Fig. 8-2-128
8-101
Connector
Top cover open switch
DP120F/DP125F Removal/Replacement
08-02-128