Toshiba DP120F Service Manual page 647

1.6.8 FUSER SETTING
This setting adjusts the temperature rank of the Fuser. Set the rank when the Main PBA or
Fuser is replaced. You will find the correct setting for this machine's fuser marked on a label
attached to the top of the Fuser.
Use the [ ↑ ] or [ ↓ ] key to select the "08.FUSER SETTING", and then press the [ENTER]
(1)
key.
FUSER TEMP SETTING
[↑↓] FOR SETTING
Select the value indicated on the label on the Fuser by the [ ↑ ] or [ ↓ ] key. Then, press the
(2)
[ENTER] key to complete the setting.
COMPLETED
March 2000 © TOSHIBA TEC
[MENU], [9], [5], [08]
← 0 (Low) to 6 (High)
0
11-35 DP120F/DP125F Troubleshooting