Table of Contents
Advertisement
Configuring the base station
Activating the waiting melody
You can only configure the waiting melody, if the enquiry connection has
i
been activated in the base station. If the call is held in the network, the
caller will hear your network provider's standard announcement.
ì
Double-click Configuration in Folder List.
This displays the dialogues available.
ì
Click Base settings.
The corresponding tabs are then displayed.
ì
Open the Music on hold tab.
ì
Define which waiting melody is to be played when a call is held in the base station:
– Activate the Off option if you do not want any waiting melody.
– Activate the Internal (from the base) option if you want to use the base station
waiting melody.
– Activate the External (via analogue terminal) option to play the waiting melody
from an external device on an analogue connection.
The External option is only available if an adapter for playing music has
i
been connected to an analogue connection and is registered with the
device type Music on hold.
ì
Click Apply.
The new settings will be sent to the base station.
Detailed description
"Base settings" on page 153
Further information
"Configuring the date and time" on page 59
"Configuring preferred redirection location" on page 60
"Configuring preferred holding for enquiry calls" on page 61
"Assigning a device for PC dialling" on page 63
"Deleting log lists" on page 65
"Restoring factory settings" on page 66
"Changing the system PIN" on page 67
68
Advertisement
Table of Contents
