Trademarks - Siemens Gigaset talk & surf 6.0 Operating Instructions Manual

Table of Contents

Advertisement

USB connection
Use only the supplied USB cable to connect your Gigaset base station to the PC.
u
Do not extend the USB cable. This could lead to higher EMV radiation.
u
Do not insert or remove the USB cable during a storm. This could cause an electric
u
shock.
Data transfer, software problems
When using Gigaset base stations to transfer data (e.g. surfing, sending faxes), software
problems on the PC (e.g. operating system crash, program bugs) may in rare cases make
it impossible to cut the data connection via your Gigaset base station from talk&surf.
Check whether your base station shows that the connection has been terminated
u
(see the base station's operating instructions). Otherwise, the connection will con-
tinue to incur charges.
Reboot your PC.
u
Remove the ISDN cable from the Gigaset base station for at least 20 seconds. This
u
will definitely close down the connection.
Further information
"Notes on the operating instructions" on page 6
"Trademarks" on page 7
"System requirements" on page 11
"Compatibility" on page 12
"Installing the software and device drivers" on page 13

Trademarks

Windows 98 SE, Windows ME, Windows 2000, Windows XP, Outlook, Outlook Express
and Windows Internet Explorer are registered trademarks of the Microsoft Corporation.
Acrobat is a registered trademark of Adobe Systems Incorporated.
Bluetooth is a registered trademark of Bluetooth Special Interest Group Inc..
Acrobat is a registered trademark of the CAPI Association.
Further information
"Notes on the operating instructions" on page 6
"Safety precautions" on page 6
"talk&surf" on page 8
For your safety
7

Advertisement

Table of Contents
loading

Table of Contents