Table of Contents
Advertisement
Altos RAIDWatch User Guide
Figure 4–19
Note that the symbols in the initial Logical View content panel are not interactive. To select a
Logical Drive or Logical Volume, click on the appropriate icon in the navigation panel.
If you need information about a particular logical drive, just let the mouse pointer hover over its
corresponding icon. A message similar to the one in Figure 4–20 will appear:
Figure 4–20
This message displays the controller assignment, ID number, RAID level, total capacity, and current
status of the logical drive.
For more information on how to create, delete, and rebuild logical drives and logical volumes, see
Chapter 5 , "Array Management", on page 71
4.6.4 Using the Physical View
Physical View under the RAID View window is where you can view and modify the configuration of
drive and host channels and physical drives.
To display the Physical View, you can either click on the Physical View button (see Figure 4–21) in
the RAID View Introduction or select the Physical View icon (see Figure 4–22) in the navigation
panel of the RAID View window. A window similar to the one below will appear.
Figure 4–21
62
Logical View Navigation Panel icons
Logical Drive message tag
Select the Physical View Button
Advertisement
Table of Contents
