Table of Contents
Advertisement
4.3.3 Disconnecting from a Disk Array System
• From the File menu, select "Disconnect". Or, click the Disconnect button on the toolbar.
Figure 4–6
All toolbar buttons, except the Connect command button, turn gray signifying disconnection from
the disk array system. Altos RAIDWatch Manager should return to the Connection View window.
4.4 Setting Up Security
Altos RAIDWatch provides password protection to prevent unauthorized access to RAID controllers
or controller setting modifications. This protection, which is implemented by the Altos RAIDWatch
Primary Agent, prompts a user for the station password the first time he or she attempts to connect
to a controller through a Secondary Agent.
By default, Altos RAIDWatch comes without passwords, so when prompted for a password the first
time, just press Enter. After gaining control, set a password to provide security to the managed disk
arrays.
4.4.1 Setting a Password for Altos RAIDWatch Controller
Access
1
Display the Configuration window by clicking on the Configuration button under the introduction
in the RAIDView, see section 4.5.4 on page 56.
2
From the Configuration window, click on the controller tab, under Controller, click on the
operation tab, under Operation, choose the Password tab. The Change Password dialog box
appears as shown in Figure 4–7.
Disconnect from Altos RAIDWatch
Operation
53
Advertisement
Table of Contents
