Table of Contents
Advertisement
Altos RAIDWatch User Guide
3.5.3.1
Base Settings
To open the "Base Settings" configuration window, select the
3–10.
• Enable - In the center of the
3.5.3.2
Phone Number List
To open the "Phone Number List" configuration window, select the "Phone Number" list sub-tab
shown in Figure 3–10. The window shown in Figure 3–11 will appear:
Figure 3–11
• Phone Number: The phone number for an event message receiving pager. (Note that any
• Severity is the parameter used to determine what levels of events to be sent via Pager (1, all
• Available phone numbers: A list of all phone numbers that the NPC will use to send a message
3.5.4 Email Settings
To open the "Email" window, first open the
select the
are two sub-tabs in the
40
notification device click on the square next to "Enable." See Figure 3–10.
Pager Phone Number List
access dialing requirements, such as accessing an outside line, must be included in the phone
number. For example: 9,,,2241603 wherein "9" is access for an outside line and ",,," indicates
a pause.)
levels; 2, Warning and Alert; 3, only Alert).
to. The numbers and the severity of the messages that will be sent to the number shown are
listed.
Email
sub-tab. The
Email
FAX
settings window there is an enable option. To configure the
NPC Settings
Email
configuration window shown in Figure 3–12 will appear. There
configuration window, "Base Settings" and "Mail Address List"
Base Setting
sub-tab shown in Figure
window shown in Figure 3–6, and then
Advertisement
Table of Contents
