Table of Contents
Advertisement
Chapter 2
Installation
This chapter contains information about installing the Altos RAIDWatch software (including its sub-
module Event Monitor) for local and remote management. The chapter includes the following
• System requirements, 2.1 on page 7.
• RAID network charting, 2.2 on page 8.
• Platform-specific requirements, 2.3 on page 9.
• Software setup, 2.4 on page 14.
• List of file Names, 2.5 on page 25
• Program Updates, 2.6 on page 26
• In-band SCSI, 2.7 on page 26.
2.1 System Requirements
The minimum hardware and software requirements for Altos RAIDWatch are listed below.
2.1.1 Server Running Altos RAIDWatch
• Pentium or above compatible (or equivalent PC) running Windows NT 4/Windows 2000/XP;
Solaris 7 & 8(SPARC, x86); AIX 4.3; or Red Hat Linux 6.1 (kernel v2.2.xx); Red Hat 7, SUSE 7
• At least one available RS-232 port.
• Hayes-compatible modem (if pager/telephone/mobile phone event notification is desired) or
fax/modem (if fax event notification is desired). [Note: fax command class 2.0 support only.]
topics:
Installation
7
Advertisement
Table of Contents
