Table of Contents
Advertisement
8.2.2.4
Click "OK" to Create LD
Once the physical drives that will be used in the LD have been selected and all the desired LD
parameters have been selected:
1
Click the "OK" button at the bottom of the LD management window shown in Figure 8–2.
2
A confirmation window shown in Figure 8–12 will appear. If you are certain that you want to create
the LD with the settings you have selected, click the "OK" button.
Figure 8–12
3
If you selected the "OK" button in the "Please Confirm" window the "Create In Progress" content
window shown in Figure 8–13 will display logical drive creation progress.
Figure 8–13
8.2.3 Expanding a Logical Volume
When physical drives are added to the array, the additional capacity can be added to existing logical
drives.
: Confirm LD Creation
Create in Progress
Drive Management
95
Advertisement
Table of Contents
