Table of Contents
Advertisement
Altos RAIDWatch User Guide
Figure 12–4
2
As shown in Figure 12–5, Select the IP address of the RAID you would like to monitor from the
Connection View list. Choose and double click on an IP address. Double click the controller icon for
that IP address. Choose and double click the connection method (e.g., In-Band SCSI).
Figure 12–5
3
The connection is successful when the list of events shown in Figure 12–6 appears and the Physical
view and Logical unit subtrees appear in the Navigation Panel.
Figure 12–6
12.5.3 Disconnecting from a Disk Array System
• Select an IP address by single mouse click. From the
The subtree representing the RAID system immediately disappears from the navigation panel once
disconnected.
166
Connecting to a RAID Agent
Select the IP
Event Monitor View
will disconnect with the host computer represented by its IP address. If the host is a Primary
Agent server, this will discontinue the connection to all the RAID systems managed by it.
Connect
menu, select Close. This method
Advertisement
Table of Contents
