Removing A Drive From An Enclosure - Acer Altos RAIDWatch Manual

Figure 10–8
Note If an empty space does not match the drive icon or controller icon you selected, the Add button
will be inactivated. This happens when you try to place a drive in an inadequate canister (e.g. you
can not place a drive in a controller canister; and you should arrange your drives according to actual
locations and SCSI ID sequence).
6 Repeat the above procedure to add more drives. Using this same method, monitoring device icons
can also be added to defined enclosures.
Note Drives may only be added to one enclosure and the enclosure window provides no "auto-update"
function. If drives are added or removed from your array, you will need to update the enclosure
settings in the
Enclosure
7 The
to display the logical relationship among physical drives. Physical drives configured in a logical drive
group will be displayed in the same color. If there are more than one logical drives, different colors
will be displayed to distinguish members of different logical drives.See Figure 10–9.
Figure 10–9
Note Physical View under the RAID View window also provides a real-time report on drive status, using
the same symbols and colors to represent various conditions. What you see in the Enclosure window
is also reflected in the Physical View. These windows, however, differ in the way physical drives are
presented; in the Enclosure window, the drives should be arranged according to their actual
locations in the drive bays, while in the Physical View, the drives are arranged according to channel
connections.

10.2.2 Removing a Drive from an Enclosure

1 Click on the target drive.
2 Click the Remove button.
Select a drive
Enclosure
window.
window also supports a logical view of connected drives. Click on the Logical button
Logical View of Drives in the Enclosure View
System Monitoring
141