Table of Contents
Advertisement
Altos RAIDWatch User Guide
8.2.3.1
Opening the "Expand Logical Drive" Window
1
Select the "Logical Drive" icon from the Logical View Navigation Panel shown in Figure 8–1. As
shown in Figure 8–14, all the LDs that have been created will appear below the "Logical Drive" icon.
Figure 8–14
2
From the list shown in FFigure 8–14, select the LD that you wish to expand. Once this LD has been
selected a "View and Edit LD Partition" table will appear in the content panel. At the top of this
window the two tabs ("Partition" and "Operation") shown in Figure 8–15, will appear. Select the
"Operation" tab.
Figure 8–15
3
After selecting the "Operation" tab, an "Expand Logical Drive" window will appear in the content
panel. The tabs shown in Figure 8–16 can be seen at the top of the "Expand Logical Drive" window.
Figure 8–16
4
Once the "Expand" tab has been selected the "Expand Logical Drive" window shown in Figure 8–
17 will appear in the content panel.
Figure 8–17
96
List of LDs
Select Operation
Select Expand
Expand Logical Drive Window
Advertisement
Table of Contents
