Table of Contents
Advertisement
Figure 2–8
Installing Active
4
If the "Next" button from Figure 2–7 was selected, the
will appear. If you wish to stop the installation procedure, then click the "Stop" button. If you wish
to continue installing the
installation process uninterrupted.
5
Once the
In-Band
components have been successfully installed, a window indicating the successful
installation, shown in Figure 2–9, will appear. To complete the process and to make the window
disappear, click on the "OK" button.
In-Band
components, allow the installation shield to continue the
Install Active
window shown in Figure 2–8
Installation
21
Advertisement
Table of Contents
