Table of Contents
Advertisement
Altos RAIDWatch User Guide
Table 2–3
Example: Settings for Windows NT 4.0
The settings for Windows NT 4.0 are provided here as an example. For the settings under other
On the front panel, use *
Parameters"; and then press <Enter>.
(For this example, we assume that there are currently no peripheral devices.
Press
Press <Enter> to confirm the selection. Now that we have changed the Peripheral Device Type, let
us set the Peripheral Device Qualifier. Press <Esc> to return to the sub-menus mentioned above. Use
the arrow keys to scroll down to Device Qualifier, press *
Qualifier Connected."
The default setting is "Connected." If your Front Panel reads "Disconnected,"
press <ENT> and you will be prompted to change to "Connected."
If your Device Qualifier setting reads "Connected," press <Esc> to return to the
host-side SCSI submenus
Use
setting is "Disabled." If the LCD reads "Enabled," press <Enter> and you will be
prompted
to accept a change. If the screen reads "Disabled," press <Esc> to return to the
host-side SCSI submenus.
28
Peripheral Device Type Settings:
No Device Present
Direct-access Device
Sequential-access Device
Processor Type
CD-ROM Device
Scanner Device
MO Device
Storage Array Controller Device
Unknown Device
operating systems, please refer toTable 2–2, "Peripheral Device Type Parameters" above.
up
up
down
or
arrows to choose "Set Device Type? Unknown (0x1f)".
up
or
down
arrows to select Support for Removable Media. The default
0x7f
0x1f
down
or
arrows to select "Peripheral Device Type
)
0
1
3
5
6
7
0xC
up
down
or
arrows to select "Device
Periph
Dev
Type Parameters
Device Type
-
No Device (0x7f)
Set Device Type
Unknown (0x1f)
Device Qualifier
Connected
Support Removable
Media Disabled
Advertisement
Table of Contents
