GE Voluson S6 Basic User Manual page 599

13.2.6.1.4 Load Full System Configuration
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
There are circumstances where it is not possible to load (restore) all the data. The following
rules specify the restrictions:
1. Generally, only restoring data from an older to a newer software version is possible.
Loading a backup into a system that has a lower software version than the system the
backup was created on is prohibited.
2. Options can only be restored on the same Voluson® S6/S8 system within the same
major software version.
3. When loading a backup into a system with a software version that has a higher major
number (2.x.x -> 3.x.x), the following items will not be restored:
•
User Settings
•
Options
•
State of the Serviceplatform (new model type necessary for VOLC)
4. The user is only allowed to restore data to a different system if and only if the software
version on this system is the same as in the backup.
5. The user is only allowed to restore data onto the same system if and only if the software
version on this system is equal or higher than the version in the backup.
6. The user is not allowed to restore the following items to a different system:
•
Windows Network Settings
•
Options
•
DICOM AE Title
•
DICOM Station Name
•
State of the serviceplatform.
Loading procedure:
1. To restore a previously saved backup, click on the [Load] button of the "Full System
Configuration" group in the System Setup - Backup page. The Full System Configuration
Load window is displayed.
2. Choose the source drive (e.g., Network Drive).
3. Click on the backup to be restored (additional information is displayed in the table).
Utilities and System Setup
13-53