GE Voluson S6 Basic User Manual page 448

Measurements and Patient Worksheets (Reports)
Note
11.2.5.20 MV (Mitral Valve)
11.2.5.21 To measure all Items at a Time
11-72
5. Move the second cursor to the second point of the measurement and press [Set] again.
To re-adjust the start point, press the upper trackball key [Change] before completing the
measurement. This alternates the control from one cursor to the other.
Aortic Root Diameter: distance between the anterior aortic wall and the posterior aortic wall
Left Atrial Diameter: distance between posterior aortic wall echo and posterior left atrial wall
Aortic Cusp Separation: distance between the coronary cusp and the non coronary cusp
There are two methods to calculate the Mitral Valve in the M mode:
•
To measure all Items at a Time
72 )
•
To measure the Items One by One
11-73 )
To calculate all the items of the Mitral Valve in M mode at a time:
1. Press the [Calc] key on the control panel.
2. Select the item [MV] and then select [All].
3.
The + D cursor appears on the M mode image. Move the cursor to the D point and press
the right or left trackball key to fix the mark.
(chapter 'To measure all Items at a Time' on page 11-
(chapter 'To measure the Items One by One' on page
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4