Button Description - GE Voluson S6 Basic User Manual

3.5.4 Control Panel

3.6 Button description

Power
Allows you to turn the system on or off.
Probe Program
Switch to the Probe Program menu for
selecting a probe with its related program.
'Probe/Program Selection'
End Exam
Patient and measurement data are stored
in the "Data manager" and all temporary
patient and measurement data are
cleared. Operation: 'End Exam'
4-10 Caution: It is absolutely necessary
to press this key before switching OFF
the system. Otherwise the current Patient
data as well as all the measurements in
the Patient report will be lost.
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
Remarks:
•
When the Automatic Optimization function is active, an asterisk (* next to the Gray map
number) is displayed in the B mode Image Info area.
•
The Image Info in 3D/4D Mode depends on the selected Acquisition and Visualization
Mode.
on page 4-7
Patient Data Entry
Switch to the patient data entry menu (the
previous exam will be closed). 'Entering
Patient Data'
Review
Switch to the exam review mode,
'Selecting Exams'
Unless no exam has been started, then
pressing the [Review] key opens the
Archive, 'Patient Archive'
10 .
Play/Record
Press this key once to change the
"DVD/VCR remote control menu".,
'P-keys'
on page
Press this key twice to start a recording
on the connected DVD recorder or video
recorder.
Press this key twice to stop the recording.
Description of the System
1. Loudspeaker position
2. TGC Slider controls
3. Menu window digipot controls
4. Menu window flipswitch
controls
5. Mode keys (digipot controls)
6. Toggle switch controls
7. Trackball
8. Alphanumeric Keyboard
9. Hard keys
1 Trackball buttons
0.
1 Probeholders
1.
on page 4-10
on page 12-39 .
on page 12-
on page 14-4
3-11