GE Voluson S6 Basic User Manual page 593

Note
13.2.6 Backup
13.2.6.1 System Configuration
Note
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
When both modes are possible and the user changes from complete mode to fast mode a
dialog will appear, saying: It is highly recommended to use complete erase mode to avoid
problems with the DVD/CD. Do you really want to use the fast erase mode?
There are 2 tabs on the Backup page.
System Configuration 'System Configuration'
Image Archive 'Image Archive'
The "System Configuration" page is subdivided in three main groups:
Image Settings Only
Save Image Settings Only
Load Image Settings Only
Full System Configuration
(chapter 'Save Full System Configuration' on page 13-50 )
Save Full SC
(chapter 'Load Full System Configuration' on page 13-53 )
Load Full SC
(chapter 'Delete Full System Configuration' on page 13-55 )
Delete Full SC
The Image Settings and/or Full System Configuration can be saved to the following
destinations:
•
D partition of internal hard disk
•
DVD/CD+(R)W
•
MOD (if present)
•
Mapped Network Drive Z review: Map Network Drive
•
Any other drive connected to the system (e.g.; an external USB-hard disk)
This function is only available in the Full Backup utility. review: Working with external USB-
Devices (chapter 'Working with external USB-Devices' on page 13-56 )
Do not disconnect an external USB-device without stopping it. Disconnecting without stopping
can lead to data loss on the external device.
on page 13-47
on page 13-56
(chapter 'General' on page 13-15 )
(chapter 'Load Image Settings Only' on page 13-48 )
Utilities and System Setup
( 'Connectivity' on page 13-30 )
13-47