GE Voluson S6 Basic User Manual page 163

Note
7.4.2.3 MCF Gain Control
7.4.2.4 Invert
7.4.2.5 Wall Motion Filter (WMF)
7.4.2.6 Velocity Range (PRF)
7.4.2.7 MCF Cineloop
7.4.3 MCF Sub Menu
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
•
'Display Format' on page 7-8
•
'Display Size' on page 7-8
The [Freeze] key stops the 2D image and MCF mode trace.
By pressing the [Freeze] key again, the MCF-cursor appears on the active 2D image.
The adjustment of the Gain control determines the amount of amplification applied to the
received echoes. All received echoes are amplified with the same gain value regardless of the
scan depth.
Rotate the [M Mode] key and/or the [CF Mode] key to adjust the gain (brightness) of the
entire image.
Note: The [M] Gain function influences the M trace brightness only. The [C] Gain function
influences the color saturation only.
Remarks:
•
The current gain value is displayed on the screen [GN ...].
For more information see 'Invert' on page 8-37.
For more information see 'Wall Motion Filter (WMF)' on page 8-41.
For more information see 'Velocity Range (PRF)' on page 8-40.
For more information see 'M Cineloop' on page 7-6.
The "MCF Main" menu has to be active.
Select the key [Sub MCF] key. The MCF Submenu appears.
M Mode
7-11