GE Voluson S6 Basic User Manual page 539

12.5.3 Reload
Note
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
When the "Reload" button is pressed, the selected image is reloaded into the system.
This also means that the exam that the image belongs to is reopened.
The other images belonging to the exam are displayed on the clipboard and can also be
reloaded to the clipboard.
To reload a different image switch the [Reload prev/next] flip switch.
The selected file is displayed in Full Screen. Actions that are then possible are determined by
whether the reloaded file is raw data or a bitmap file.
Reload of RAW data:
It is possible to perform the following functions after a reload of RAW data sets from internal
archive into the system:
1. 2D Cine + Color Modes
When reloading a 2D Cine, the Auto cine menu will immediately come up and the cine
will play automatically. Please refer to '2D Auto Cine'
2. 4D Cine
When reloading a 4D Cine, press the [Start] key on the trackball to start the cine.
The Auto Cine Menu will be displayed on the screen. For details, please refer to 'Volume
Cine' on page 9-95
3. Doppler Cine
4. M-Mode Cine
5. Zoom without overview image
6. Display measurements, bodymarks, annotations and indicators as they were, when the
data was saved.
7. Make new measurements including AutoTrace measurements
8. Edit annotations, patient name and medical history.
Changes can not be saved if the exam was reloaded from a read-only file. In this case
pressing the [Patient] hardkey opens a new exam with a new patient.
9. Edit the angle in PW mode
on page 6-18
Archive
12-35