GE Voluson S6 Basic User Manual page 311

Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
For Example: To produce a better, smoothed surface by mixing surface smooth and light
mode.
Set the Threshold low (Reject) Normally this threshold must always be adjusted for a good
appearance of the 3D surface image. By changing the threshold all echoes below the level are
enhanced in pink color for a certain interval.
Application: With this function small echoes or noise are removed in order to achieve a "clear
vision" from the start border of the render box to the surface of interest.
Set the Volume Angle Set the volume sweep angle by using the control below the menu area.
Set the Zoom control The sectional images (A, B and C) and the 3D image will be magnified
from the center of rotation.
Select Image Orientation of the Real Time 4D image With this function the image orientation of
the rendered image can be changed. The image orientation of the sectional planes is not
changed.
The 3D image orientation can be changed in freeze - or scan mode.
Select a Reference Image Selecting a reference image automatically determines the control
functions of the controls and the trackball for the free adjustment of a sectional plane. The one
chosen for reference is marked by the lit key.
Reset the render curve to its default position Press the upper trackball key to reset the render
start curve to its default (start) position.
Volume Mode
9-93