GE Voluson S6 Basic User Manual page 52

Description of the System
Flip (Left/Right)
Press this key to flip the image left and
right alternatively.
XTD-View (Extended View)
Pressing activates/deactivates the XTD-
View function. Functions depend on
current probe. 'XTD-View (Extended
View)'
Coded Harmonic Imaging
Pressing activates/deactivates the Coded
Harmonic Imaging. 'Harmonic Imaging
(HI)'
ABC - Image Annotation
Write a comment/annoation directly onto
the screen. 'Image Annotation'
27
Continuous Wave Doppler
Pressing activates/deactivates the Continuous Wave Doppler. Functions depend on current
probe. See 'Continuous Wave Doppler Mode (CW Mode)' on page 8‐8 for more information.
Automatic Optimization
in 2D Mode: Press this key to use
automatic optimization on the gray scale
to enhance the contrast resolution. '2D
Automatic Optimization'
PW Mode: Press this key to use
automatic optimization on the PRF and
the Baseline. Operation: 'PW Operation'
on page 8-4 in 3D/4D Mode: Press
this key to use automatic optimization on
the sectional planes A, B and C. The
rendered image is not affected. 'After the
Static 3D Sectional Planes Acquisition'
page 9-21
Pointer
Brings up an arrow shaped cursor for
menu and image operations.
Exit
Press the [Exit] key on the control panel
to exit the current menu.
3D
Activates 3D mode (Volume Mode)
Chapter 9
3-12
on page 6-26
on page 6-7
on page 4-
on page 6-6 in
Flip (Top/Down)
Press this key to flip the image top and
down alternatively.
No function
Report (Worksheet)
Activates the Patient worksheet of the
currently selected application.
Bodymark
Activate to use Bodymark symbols on the
screen. 'Pictogram'
Clear
To erase graphics, measurements and
annotations on the screen, depending on
the currently used function.
•
If image annotation is active, then
only text will be erased.
•
If the measurement function is active,
then only measurements will be
erased.
•
If bodymark is active, then only
bodymarks will be erased
•
on
If none of the three above functions is
active, all graphics, measurements
and annotations will be erased.
Calculations
Allows measurements/calculations in
2D/3D mode, M mode and Spectral-
Doppler mode, using various measure
items for different applications
information see Chapter 11.
Caliper
For more information see 'Generic
Measurements'
Real Time 4D Mode
Activates the Real Time 4D mode
(continuous volume sweep)
information see 'Real Time 4D
Acquisition'
Chapter 11
on page 4-30
For more
on page 11-2.
For more
on page 9-78.
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4