Maintenance And Repair - Siemens SIMATIC S7-1500 System Manual

Maintenance

15.9 Maintenance and repair

Byte
5
6 to 7
8 to 9
10 to 13
Programming example
You can find a programming example in the following FAQ on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109782270).
15.9 Maintenance and repair
The SIMATIC Drive Controller is maintenance-free.
Note
Repairs to the SIMATIC Drive Controller may only be carried out by the manufacturer.
336
Data type Meaning
Bits 5 to 7:
BYTE Data format:
B#16#05: Word
WORD Error type:
W#16#3530: Overtemperature warning
WORD Additional error value:
W#16#1010: Diagnostics interrupt/OB82 call
DWORD Additional error information: Not relevant
3: Input/output signal
System Manual, 11/2023, A5E46600094-AD
SIMATIC Drive Controller