Sinamics Integrated Reset To Factory Settings; Fault Reactions With Failsafe Components - Siemens SIMATIC S7-1500 System Manual

Maintenance

15.6 SINAMICS Integrated reset to factory settings

15.6 SINAMICS Integrated reset to factory settings
Restoring factory settings
In online mode, you can restore the factory settings for SINAMICS Integrated.
1. Establish an online connection to SINAMICS Integrated.
2. Open the online and diagnostics view of SINAMICS Integrated
3. In the dialog box, select "Backup/Restore > Reset to factory settings" and then the "Start"
button.
4. Click "OK" in response to the confirmation prompt.
The factory settings are restored. System updates and firmware updates are retained when
the SINAMICS Integrated is reset to factory settings.
Note
Alternatively, you can reset the SINAMICS Integrated to factory settings in the function view
of the drive control. To do so, click the icon
15.7

Fault reactions with failsafe components

Safe state (safety concept)
The basic principle behind the safety concept is the existence of a safe state for all process
variables.
Note
For fail-safe input and output modules, this safe state is the value "0".
332
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD