Bosch AutoDome VG4-A-9230 Series Installation Manual page 63

Modular camera system
Table of Contents

Advertisement

AutoDome Modular Camera System
Ethernet
AutoDome Ethernet models are connected to a 10/100 Base-T network either directly or via a
hub. Both video and control are transmitted over a standard TCP/IP network using the built-in
web server.
.
Cable Type
Maximum Distance
Bandwidth
Terminal Connector
NOTICE! Do not connect the RJ45 connector unless using UTP video or Ethernet.
!
Fiber Optic
Fiber Optic models transmit both video and biphase control over single mode or multimode
fiber. Use a standard male ST fiber connector to terminate connections.
Multimode
Fiber Type
Maximum Distance
Minimum Bandwidth
Requirement
Terminal Connector
Single Mode
Fiber Type
Maximum Distance
Minimum Bandwidth
Requirement
Terminal Connector
Bosch Security Systems, Inc.
UTP CAT-5
100 m (328 ft)
10/100 Base-T
RJ45
50/125 mm, 62.5/125 mm, low loss multimode glass fiber
4 km (2.5 miles)
20 MHz (Video - 850 nm / Control - 1300 nm)
Bosch LTC 4629 Fiber Receiver at controller end of system
ST
9/125 mm, low loss single glass fiber
16 km (10 miles)
20 MHz (Video/Control - 1300 nm)
Single mode fiber receiver at controller end of system
ST
Installation Manual
Cable and Wire Standards | en
F01U010921 | 1.0 | 2006.10
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Autodome 300 seriesAutodome vg4 seriesVg4-323-ets

Table of Contents