24
en | Installing Roof Parapet and Pipe Mounts
3.
Route the control wires from the Power Supply to the Pipe Interface Board. Then attach
the supplied six (6) pin control data connector to the wires in the Power Supply Box.
Fig. 2.5 Optional Fiber Optic Module
F01U010921 | 1.0 | 2006.10
(TRANSFORMER)
(GND)
LINE NC NEUT
GND TXD RXD
C+ C-
Power In
POWER IN
Installation Manual
BNC TO DOME
ST CONNECTOR
(FIBER)
Data IN/OUT
DATA IN/OUT
AutoDome Modular Camera System
IN/OUT
IN/OUT
IN/OUT
IN/OUT
IN/OUT
Bosch Security Systems, Inc.