Table of Contents
Advertisement
14
en | Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts
6.
Remove the Bubble from its packing box, and remove the protective plastic bag.
7.
Place the bubble over the Camera Module and rotate it clockwise (approximately 1/8
turn) until it locks in place. You will hear an audible click when it locks.
Fig. 1.11 Attach bubble
F01U010921 | 1.0 | 2006.10
Installation Manual
AutoDome Modular Camera System
Bosch Security Systems, Inc.
Advertisement
Table of Contents
