Bosch AutoDome VG4-A-9230 Series Installation Manual page 38

28 en | Installing Roof Parapet and Pipe Mounts
6. Remove the End Cap from the front of the arm and feed the video, control, and power
wires up through the bottom of the pipe arm and out the front end.
Fig. 2.9 VG4-A-9230 Parapet Mount
7. Fold the video, control, and power wires back at the front end of the arm and route them
down and out through the Down Pipe. Then replace the End Cap.
8. Apply the supplied thread sealant to the Down Pipe threads:
a.
b.
c.
F01U010921 | 1.0 | 2006.10
Parapet Pipe Arm
Parapet Pipe Arm
1/4 -20 SS Cap Screw 1/4-20 SS Cap Screw
Make sure all surfaces are clean and dry.
Apply a bead of sealant completely around the leading threads of the male fitting.
Force the adhesive into the threads to thoroughly fill all voids.
Installation Manual
AutoDome Modular Camera System
End Cap with O-Ring
End Cap with O-ring
10-24 SS Pan Head Screw
10-24 SS Pan Head Screw
Down Pipe Down Pipe
Bosch Security Systems, Inc.