Table of Contents
Advertisement
AutoDome Modular Camera System
2.1.3
Tools Required
–
5 mm Allen wrench (supplied)
–
Small straight blade screwdrivers ~ 2.5 mm (0.1 in.) - 3.1 mm (1/8 in.)
–
Medium straight blade screwdriver
–
No. 1 and No. 2 Phillips screwdriver
–
Socket wrench and 9/16 in. socket
–
Pipe Wrench
–
Barrel connector (if installing a fiber optic model)
2.2
Pre-installation Check List
1.
Determine the location and distance for the power supply box based on its voltage and
current consumption. See Chapter 4: Cable and Wire Standards for wiring information and
distances.
2.
Use only UL listed liquid tight strain reliefs for conduits to the Power Supply Box to
ensure that water cannot enter the box. You must use water tight conduits and fittings to
meet NEMA 4 standards.
WARNING! Power and I/O cabling must be routed separately inside different permanently
!
earthed metal conduits.
3.
Install all rough wiring including: power, control, video coax, alarms I/O, relay I/O, and
fiber optic cabling. See Chapter 4: Cable and Wire Standards for video and control proto-
col methods.
WARNING! External interconnecting cables are to be installed in accordance to NEC,
ANSI/NFPA70 (for US application) and Canadian Electrical Code, Part I, CSA C22.1 (for CAN
application) and in accordance to local country codes for all other countries.
!
Branch circuit protection incorporating a 20 A, 2-pole Listed Circuit Breaker or Branch Rated
Fuses are required as part of the building installation. A readily accessible 2-pole disconnect
device with a contact separation of at least 3 mm must be incorporated.
4.
Choose the appropriate AutoDome model (indoor or outdoor) for the environment in
which it will be used.
5.
Choose the appropriate mounting kit to use depending on the location of the AutoDome:
Parapet (Roof) mount or the Pipe mount.
CAUTION! Select a rigid mounting location to prevent excessive vibration to the AutoDome
camera.
Bosch Security Systems, Inc.
Installing Roof Parapet and Pipe Mounts | en
Installation Manual
19
F01U010921 | 1.0 | 2006.10
Advertisement
Table of Contents
