Canon Finisher-AK1 Service Manual page 329

2) Install the Latch Receiver (Front) and Latch Receiver (Rear) in the left side of the Multi
Drawer Document Insertion Unit.
• 4 Screws (RS tightening; M4x10)
CAUTION:
Confirm the engraved mark on each latch plate when attaching.
• Latch Receiver (Front) : F
• Latch Receiver (Rear) : R
R
x4
Latch Receiver (Rear)
7
Installation > Installation Procedure > Connecting with the Multi Drawer Document Insertion Unit
F
Latch Receiver (Front)
F-7-30
7 Installation > Installation Procedure > Connecting with the Multi Drawer Document Insertion Unit
3) Install the Positioning Pin.
• 2 Screws (RS tightening; M4x10)
x2
7-13
F-7-31
7-13