Canon Finisher-AK1 Service Manual page 327

3) Lift the Latch Plate (Front) up and lock it on the cover, and connect the Finisher and
the host machine by fitting the Positioning Pin of the host machine into the hole on the
Positioning Plate of the Finisher.
< Front side >
Latch Plate (Front)
ラッチ台(前)
< Rear side >
Positioning Pin Hole
7
Installation > Installation Procedure > Connecting with the Host Machine
F-7-23
F-7-24
7 Installation > Installation Procedure > Connecting with the Host Machine
4) Lower the Latch Plate (Front) and fix it.
• 1 Screw (Use the Screw removed in the step 7) of "Before Installing the Finisher")
5) Close the Finisher Front Cover.
6) Move the Latch Plate (Rear) in the direction of the arrow and insert it to the pin to fix it.
• 1 Screw (Use the Screw removed in the step 9) of "Before Installing the Finisher")
Latch Plate (Rear)
Screw
7-11
Latch Plate (Front)
Screw
F-7-25
F-7-26
7-11