Removing The Saddle Inlet Static Eliminator - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Saddle Inlet Static Eliminator > Procedure

Removing the Saddle Inlet Static Eliminator

■ Preparation
1) Open the Front Cover.
2) Pull out the Saddle Unit. (service position)(Refer to page 4-99)
■ Procedure
1) Remove the Static Eliminator Cover [1].
• 2 Screws [2]
[2]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Saddle Inlet Static Eliminator > Procedure
[1]
F-4-243
2) Remove the Saddle Inlet Static Eliminator [1].
• 2 Screws [2]
[2]
4-100
[1]
[2]
F-4-244
4-100