Siemens ACUSON Antares Instructions For Use Manual page 99

Menu
Selection Tool Tip
Persist Persistence
Maps Maps
Tint Tint
ClarifyVE ClarifyVE On/Off
(current ClarifyVE Levels
setting)
SieClear SieClear
TEQ Set TEQ Overall Gain
Set
1
Timer StopWatch
1
Trig Trigger
2
Balance Balance Key
(CA/2D)
(current Imaging
1
setting) Sequence
1
Burst FR Burst Duration
(Frames)
Start Start Burst
1
Burst
1
For systems installed with the Cadence Contrast Agent Imaging (CCAI) option and/or the
Cadence Contrast Pulse Sequencing (CPS) option
2
For systems installed with the the Cadence Contrast Pulse Sequencing (CPS) option
[ 1 ] I N S T R U C T I O N S F O R
Description
Increasing Persistence creates a visible smoothing
effect by maintaining lines of image data for each
frame of imaging. A higher setting includes more
previous frames in the image data.
Selects a processing curve that assigns echo
amplitudes to gray levels.
Changes the color of the image by adding blue, red,
yellow, or green to the gray in a gray map.
For systems installed with the Clarify vascular
enhancement (VE) technology option:
Activates Clarify VE.
For systems installed with the Clarify VE option:
When Clarify VE is active, selects the level of flow
information to add to the image.
Activates SieClear multi-view spatial compounding.
Saves a TEQ gain offset for the current 2D-mode
imaging feature.
Activates or deactivates the on-screen Timer. The
Timer displays the time elapsed since the timer was
started.
When enabled, limits the frame rate to the selected
maximum value.
Note: This selection is not available during Doppler or
M-mode imaging.
Optimizes the image when using the ADI or CPS
imaging technique.
Sets the imaging technique used during CCAI
imaging:
Note: AEI-High MI and ECI-Low MI are available for
the C5-2 transducer only.
Sets the frame rate to be used during the Burst
process. The frame rate determines the duration of
the Burst process.
Initiates the Burst process during CCAI imaging.
U S E
3 S y s t e m C o n t r o l s
Settings
Dependent on
transducer and
exam type
A, B, C, D, E, F,
G, H, I
0 to 15
---
1 to 7
Off, 1 to 4
---
Off, On
Transducer-
dependent
CA (Contrast
Agent only)
2D (2D-mode
only)
2
ADI
2
CPS
AEI-High MI
ECI-Low MI
1, 3, 5, 7, 10, 15,
20, 30, 50
---
3 - 2 7