4 S y s t e m S e t u p
4. Select the Configure Printers tab and enable the required
Auto Transfer (print timing) option for each printer:
–
During Exam – system prints when film sheet is full, according to
selected layout.
End of Exam – system prints when examination ends.
–
Disabled – system prints when user accesses the Filming screen
–
and then selects the Expose Film Task button.
5. Select the Save button to save your settings.
To assign the store function to a PRINT/STORE key:
1. Press the Presets key located on the keyboard, or select the Presets
shortcut button at the bottom of the screen.
2. Select the Print/Store menu on the left of the screen.
The system displays the Print/Store menu. In the Print Routing
section on the upper right of the screen, the system displays a graphic
for each PRINT/STORE key. Under each PRINT/STORE key graphic are
drop-down menus for printer selection and a Store check box.
3. Select the Store check box located under the graphic for the required
PRINT/STORE key.
4. Select the Save button to save your settings.
4 - 2 8
[ 1 ]
I N S T R U C T I O N S
F O R
U S E