Panasonic EBL512 G3 Planning Instructions page 82

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
Figure 16. Win512 version 2.7.x "Interlocking Combination"
dialog box.
Name: Displayed in the Win512 version 2.7.x Tree and List views.
Default is "Interlocking Combination" that can be edited when wanted
/ required. "Area-Point" will be added in the tree view. "Area-Point"
will be shown under "Zone-Address" in the list view.
Outputs The available interlocking outputs list displays all the
previous programmed outputs, Type = "Interlocking".
Inputs The available interlocking inputs list displays all the previous
programmed inputs, Type "Interlocking".
Select one Output and one Input. Press Select and the selected
output and input will be shown in the Output and Input fields above.
It is possible to Delete an output / input (from the field).
It is possible to "jump" to the output and input respectively by clicking
Find.
Area and Point: Each "Interlocking Combination" is presented as
Area-Point (compare with Zone-Address). Area numbers 1-999 are
possible and within each Area, Point numbers 1-99 are possible to use.
An Area can only be used in one c.i.e.
Text = User definable text message to be shown in the menu H9/C1.
Can be written in this field or in the "Texts" dialog box, see chapter
"Creating the alarm texts via Win512 version 2.7.x", page 107.
Buzzer checked = activated interlocking input will turn on the c.i.e.
76
buzzer (0.8 / 0.8 sec.)
automatically turned on again, if a new interlocking input is activated.
76 Priority order: Fire alarm – Pre-warning - Interlocking - Fault.
. The buzzer can be silenced. It will be
80