Alarm Devices (Addressable Sounders) - Panasonic EBL512 G3 Planning Instructions

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: -
9.1.3
Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
technical address can be written.
The Address setting tool (3314) is also used for mode setting:
NORMAL mode: Used for 3364.
2330 mode: Not used.
2312 mode: Not used.
NOTE! See also chapter "Limitations", page 160.

Alarm devices (addressable sounders)

3377 Addressable siren. The siren is connected to a COM loop. It is
power supplied via the COM loop, i.e. the number of sirens is
depending on the type and number of other units connected to
37
the COM loop.
(tones) and three priority levels are available. For each level an
output control expression and a sound type is programmed (via
Win512 version 2.7.x).
Product Leaflet. The COM loop address is set with the Address
setting tool (3314).
The Address setting tool (3314) is also used for mode setting:
NORMAL mode: Used for 3377.
2330 mode: Not used.
2312 mode: Not used.
NOTE! See also chapter "Limitations", page 160.
3379 Addressable sounder base.
(3312) mounted together with a sounder. 3379 is mounted in
the ceiling. An analog detector can be plugged in the base,
which has screw terminals for the COM loop and an ext. LED
(2218). Prepared for mechanical lock of the detector - if
required. Recess for label holder (3391).
supplied via the COM loop, i.e. the number of sounder bases is
depending on the type and number of other units connected to
37
the COM loop . Three sound types (tones) and three priority
levels are available. For each level an output control expression
and a sound type is programmed (via Win512 version 2.7.x).
For more technical data, see the Product Leaflet.
The COM loop address is set with the Address setting tool
(3314). The unit has an address label on which the programmed
COM loop address can be written. (The detector has its own
COM loop address set via the Address setting tool 3314.)
The Address setting tool 3314 is also used for mode setting:
NORMAL mode: Used for 3379.
2330 mode: Not used.
2312 mode: Not used.
NOTE! See also chapter "Limitations", page 160.
4380 Addressable beacon. The LED beacon is connected to a COM
loop. It is power supplied via the COM loop, i.e. the number of
beacons is depending on the type and number of other units
37
The number of 3377 + 3379 units must be < 50.
38
This unit has replaced the Sounder base 3378.
Red ABS plastic housing. Three sound types
For more technical data, see the
38
3379 consists of an analog base
48
3379 is power