Pulse Output Mode And Switch Logic Settings - Panasonic FP2-PP2T Technical Manual

5.2 Pulse Output Mode and Switch Logic Settings

The direction which an elapsed value increases is called CW and the direction which it decreases is
called CCW on the positioning unit. Therefore, the limit input in the CW direction is Limit (+) valid, and
the input in the CCW direction is Limit (–) valid.
The following settings for the positioning unit iare required for the establishment of the system.
- Pulse output mode
- Various input valid logics
[Parameter setting area]
1st axis
Offset
Bank Name
address
Pulse output
02H 015H
control code
2nd axis
Offset
Bank Name
address
Pulse output
0CH 015H
control code
3rd axis
Offset
Bank Name
address
Pulse output
16H 015H
control code
4th axis
Offset
Bank Name
address
Pulse output
20H 015H
control code
Reference: <17.6.2 Parameter Setting Area>
Descriptions
Descriptions
Refer to the 1st axis.
Descriptions
Refer to the 1st axis.
Descriptions
Refer to the 1st axis.
5-3