Bosch Rexroth HD 2/H Assembly Instructions Manual page 35

• Test runs with open panels are only allowed if they are carried out by a competent
person using tip switches and no interference through other switching elements
exists.
• Only start up the product when all safety devices of the system are installed and
are operational.
• Only start up a fully assembled product.
• Double check the correct adjustment of the lift rotate table in the section profi le
(see Fig. 7 on page 20 and Fig. 21 on page 37).
Starting up
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
35/56