Table of Contents
Advertisement
Remove the covers of the
inspection openings (C)
and connect the HD 2/H
to the compressed air
supply.
1.
Loosen the screws
2.
Pull the cover upwards
3.
Remove the cover (C).
7.5.8
Make the pneumatic connection to the product
High pneumatic pressure!
Risk of serious injury and even death.
Deactivate the compressed air supply to the relevant system component before
making the pneumatic connection to the product, installing, or disassembling it.
Secure the system against unintentional restarting.
Unintentional rapid rotational movements, falling objects
Risk of injury caused by unintentional rapid rotational movements and falling
objects.
Make sure that the rotating cylinder is in its original position and under pressure
(exhaust air) before commissioning/re-commissioning and in particular before
each restart of the system after shutdown, malfunction, breaks, shift changes or
rest periods.
• For the specifi cation of the compressed air and the operating pressure, see page 54.
Fig. 18:
Open inspection openings
WARNING
CAUTION
3
2
C
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
Installation
31/56
2x
1
SW4
358 732-26
Advertisement
Table of Contents
