Please note:
Because of its low weight,
size 1 can be installed
into the section profi le
directly from below without
dismantling.
1.
Mark the installation
position of HD 2/H.
2.
Install the T-head bolts.
3.
Install the lift rotate unit
HD 2/H to the section
profi le from below
Please note:
Use a lifting aid to lift the
product. For example, the
eye bolts (X) in the base
plate serve as lifting points
for a round sling (see Fig. 6)
4.
Insert the T-bolts into
the section profi le.
5.
Hand tighten the collar
nuts
7.5 Installing the product
Incomplete or incorrect installation can lead to property damage
The product can be damaged; the service life may be adversely affected.
With size 3 ensure that the additional supports are installed (mandatory).
7.5.1
Install lift rotate unit HD 2/H size 1 in section ST 2
5
SW13
X
2
X
Fig. 6:
Install lift rotate unit HD 2/H size 1 in section ST 2 (example shown here size 1 180°)
NOTICE
=
1
=
4
3
3 842 358 796/2015-01, MIT: HD 2/H, Bosch Rexroth AG
Installation
19/56
358 732-28