Bosch Access Easy Controller Hardware Manual page 83

Access Easy Controller
11. Enter the Access Easy Controller's IP address in the browser's Address box as shown.
12. Press the Enter key or click
13. Proceed to login using the default user id: USER1 and password 8088. Upon successful
14. From the home page select the Panel Admin, Panel Setup. The Network Settings page
15. After the database has been saved, reboot the controller. It will now boot using the new
NOTICE!
i
For detailed information on database configuration, refer to the Access Easy Controller Soft-
ware User Manual.
Bosch Security Systems
page.
login, the controller's shown page will be displayed.
should be displayed. Make any needed changes to configure the controller for operation
on the customer's network. Click Save to store the changes.
IP address. The controller is now ready to be connected to the customer's network.
Hardware Manual
Configuring a Web Browser to Work with Access Easy
Controller | en
. This should open the Access Easy Controller's login
83
Ver 2.0.0 | 2006.07