Bosch Access Easy Controller Hardware Manual page 187

Access Easy Controller
3.
When the crimping is completed, do a visual inspection through the plastic housing of the ter-
minated modular plug cable assembly. It should reveal whether the conductors are within
acceptable range.
The figure on the following page shows a cutaway of a typical terminated plug and the
required location of the conductors.
Bosch Security Systems
Step 3
a. Squeeze handles until die bottoms.
b. Depress locking tab (if applicable) and remove terminated modular plug cable
assembly.
Hardware Manual
APPENDIX A RJ45 Cable Assembly Procedure | en 187
Ver 2.0.0 | 2006.07