Service and diagnostics
16.3 System utilization
16.3
System utilization
For the NC areas you can display the system resources (utilization display) currently being
used: This shows you the net and gross runtimes for the position controller, interpolator, and
forward motion.
Procedure
162
1.
Select the "Diagnostics" operating area.
2.
Press the menu forward key.
New horizontal softkeys are displayed.
3.
Press the "Syst. utiliz." softkey.
The "System Utilization" window appears.
You can track the dynamic utilization display.
4.
Press the "Stop" softkey to stop the display update.
5.
Press the "Start" softkey to refresh the values.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)