Siemens SINUMERIK 840D sl Commissioning Manual page 189

Details of the network connections
• Computer name
• DNS name
• MAC address
• Address type
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
Green Greater than 95%
Yellow 50 - 95%
Red Less than 50%
Computer name of the controller as stored at the DNS server (Domain Name Service).
Physical address of the network adapter
Information about the configuration of the network adapter in the configuration file
basesys.ini:
– DHCP: DHCP is active for this network adapter.
– The information behind the hyphen "-" specifies the DHCP mode of operation:
off
- DHCP is deactivated for this adapter
Client
- a DHCP client that procures an IP address and further data from a server, is
running on the interface
Server
- the NCU provides a DHCP server on this interface that supplies clients on
this network with IPs
Synced Server
- a protocol is active with which several NCUs synchronize with each
other. This ensures that always only one of these NCUs functions as DHCP server
and, for example, no double IP addresses
are assigned.
If a network adapter is functioning as "Synced Server", then further information is
displayed in the "Status of sync. DHCP server" line
– If no changes have been made for the network adapters in the configuration file,
then "Default" is also output.
– Manual
The settings IP address, subnet mask, DNS server 1, DNS server 2 and gateway are
configured in the basesys.ini.
Note:
In the "Change" mode, either "Manual" or "DHCP" can be selected (only for
company network, X130).
Service and diagnostics
16.7 PROFIBUS diagnostics
183