Creating A Selection File - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics
16.5 Calling up the version data
16.5.1.2

Creating a selection file

You can store several addresses and machine types in the selection files.
In future, EUNA data will also be available, which you can store in the controller.
The data acquired in the selection files are available to you when you fill in the input fields in
the "Machine Identity" window.
Create the following files:
● File "dealer.xml" for dealer data
● File "ma_types.xml" for machine types
● File "oem.xml" for manufacturer data
● File"oemsubs.xml" for manufacturer data of branch
● File "user.xml" for end user data
166
Press the softkey "Manufacturer branch" if you want to acquire and
store address data of the manufacturer branch.
Pressing the softkey once again changes it back to "Manufacturer".
- OR/AND -
Press the softkey "Dealer" if you want to acquire and store dealer-
specific data.
- OR/AND -
Press the softkey "End user" if you want to acquire and store user-
specific data.
4. Enter the address data in the following text fields.
- OR -
If selection files exist, all unique information will automatically be set to
valid for the system when you press the "OK" softkey. The entries are
saved to HMI sl.
See Section: Creating a selection file (Page 166)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)