Siemens SINUMERIK 840D sl Commissioning Manual page 78

Customizing the "Machine" operating area
10.9 Activating the "Teach In" function
Access to the function still depends on access rights.
MD51045 $MNS_ACCESS_TEACH_IN
Default: 7
MD51050 $MNS_ACCESS_WRITE_PROGRAM
Default: 7
"Teach prog." softkey not active
● The program is in the stop, reset or interruption mode.
● Not all axes have been referenced.
72
The protection level for the execution of "Write traversing movements to
MDA buffer" for TEACH IN is specified.
The protection level for the writing of part programs is specified.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)