Siemens SINUMERIK 840D sl Commissioning Manual page 54

Machine and setting data
9.4 Displaying/editing setting data
Axis selection
If several components are available for the area selected (e.g. "Axis SD "), you can choose
from the following options:
48
Press the "Reset (po)" softkey.
A safety prompt appears.
7. Press the "OK" softkey to trigger a warm restart.
- OR -
Press the "Cancel" softkey if you do not want to apply the settings.
1. Press the "Axis +" or "Axis -" softkey.
The values of the next (+) and the previous (-) axes are displayed.
- OR -
Press the "Direct selection..." softkey.
The "Direct Selection" window opens.
2. Select the required axis directly from those available in the drop-down
list box.
3. Press the "OK" softkey to save the setting.
- OR -
Press the "Cancel" softkey to reject the setting.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)